ALGAE IN SWIMMING POOLS -- HOW TO GET RID OF FOREVER AND IT FAST!

Pool algae may seem quite innocuous at first. After all, what's wrong with a little bit of weed in the water? It is the most natural thing on earth...except, it is gross. .

The bacteria that feed on the algae may pose a health risk, while it's true that green algae doesn't cause any harm to humans. Give a opportunity to flourish to algae and it will balloon into a nasty problem that can be both difficult and costly to fix.

If left unchecked algae can harm pumps, motor, filters, grains and totally ruin a pool! It results in poor visibility. ​ Worse, this slimy substance can lead to accidents and causes pool surfaces to become slippery.

This means that along with algae, a bunch of other possibly harmful micro-organisms are with a ball of time in your pool!

The colour green looks great on dollar bills, not. So let's find out exactly what causes algae and ways to get rid of pool algae -- quickly and forever.


The majority algae, of the time makes its presence known by imparting a greenish tinge to the water. The water might also take upon blue-black color or a yellowish depending on the kind of algae that is present inside.

The water gets muddy and whether the growth is not controlled, visibility becomes so poor that you may struggle to see the bottom of the pool.

It grows in corners, around steps and to skimmers and jets.
They're caused by the wind, rain, contaminated swimsuits and pool cleaning tools etc.. If your water chemistry is not appropriate, the spores will probably thank you for your hospitality and bloom in a mater of hours.

You can wash swimsuits and tools before using them.
Still, you can't control factors like sunlight, humidity, wind etc..
That means it's possible to be 100% sure that algae spores will gain entry into your pool, either 1 way or another. You have to be ready to attack the problem before it gets out of hand.


Frequently, the tint of this water might not be obvious. The fact that the water gets makes it harder to identify the shade.

Thus, so as to find out which sort of algae has taken up residence you are going to have to take a closer look where it's started to grow.


​Green Algae:


This type of algae is known as Chlorophyta; it receives its name from chlorophyll, which is also responsible for the colour. Green algae floats in water and attaches onto flooring and walls.

Swimwear and then reused from the pool and toys which have been used without sanitizing cause green algae to get into pool water.

Inefficient filtration and lack of proper sanitization can boost growth of green algae. This sort of algae is the most frequent and thankfully, it is the most easy to kill.


Also known as mustard or brown algae, yellow algae appears like pollen or lavender. It is a lot rarer than algae and unlike the latter, it isn't slimy. It's resistant.


The name for this sort of algae is cyanobacteria. Technically, it's not even algae but it is extremely powerful due to the simple fact that it can create its own food.

It's like a monster that doesn't quit growing and what is more, its roots could penetrate into concrete. It is difficult to eradicate.

(please be aware that pink slime, which is actually a kind of bacteria and often wrongly called pink algae, can also be seen in pools, especially in PVC pipes.

Pink slime does not harm humans but the pool can be harmed by it. It is very resistant to cleaning agents and chemicals, such as chlorine.)


Ways to Get Rid Of Pool Algae:



Measure 1 - Vacuum the pool:


Pool experts opine that manual pruning is the best solution for pool cleaners. Nonetheless, this is an extremely labor-intensive exercise which can take a lot of time up based upon the size of your swimming pool.

So unless you would like to recruit kids, their friends and their friends' friends to aid you this might not be the option for you.
Manual vacuuming needs a bit of DIY, so it may be more sensible to stick to robotic pool cleaner.

Please ensure that you don't only rinse the filters following using robotic pool cleaners.

Some spores will be emptied into the water and can get trapped . Give the filters a comprehensive wash with detergent/soap.

​Measure 2 -- Brush like there's no tomorrow


You'll need a rigid pool brush for this purpose.

Pool cleaners cannot handle corners and measures well and you have no choice but to manually brush steps, corners, the walls and floor extremely well.

This can help loosen the algae and increase the efficacy of swimming sanitizer. Use long strokes and be sure to overlap your strokes so you don't miss out on any key places.

Note that the water will get more cloudy as you affect and go visibility. Get to the problem areas.


​Measure 3 -- Test & Balance Pool Water:


This is easier said than done but there is simply no way around it. That means examine your water's chemistry and you are going to have to fight your way.

You can do this with the support of strips, electronic kits, liquid kits etc.. All of them include instructions so follow along with the dot.

Please note that we are trying to ascertain the chlorine levels, alkalinity and pH of the water.
So they're within the range, we will then correct these parameters.

The pool is essentially prepared by this . If these levels are unbalanced, shocking is less powerful.


While conventional wisdom suggests using stabilized chlorine to shock the pool, it causes. So it is better to use calcium hypochlorite.
Read the package instructions for the recommended dose to your pool size. Then multiple that dosage by two for green algae, 3 to yellow and 4 for black algae.
Throw cleaning tools into the pool while also shocking. They are sanitized by it .


After shocking, the water will look cloudy blue. Turn on pool filter for at least 8 hours. (Then sanitize or replace the filter ) You are able to utilize pool water clarifier to accelerate the procedure.
Once done, check pool chemistry meticulously (using a kit) prior to going into the water.

​Flocculant and Algaecide: These also help in getting rid of algae however they have their limitations.

Flocculant functions only for small quantities of algae. it could be filtered from the pool, it essentially binds to the algae.

Once pool has been shocked, wait for the chlorine levels to drop below 5 parts per million and add algaecide (refer package instructions to determine dosage). Give pool surfaces a good brushing. Once dead, the algae will be filtered out.

Bear in mind, algae may infest salt water pools. Please don't neglect to use ​calcium hypochlorite (the swimming shock treatment I mentioned above).
Adopt a three pronged approach to prevent re-occurrences of algae in pool:

Wash tools, toys and swimsuits thoroughly before using in pool
Balance chemistry and shock periodically
Clean your pool regularly. This is made easier via a robotic pool cleaner.


Our website includes lots of information on robotic pool cleaner pool cleaning and maintenance.

While others cant walls can climb. You'll need to wash yourself, if you get one that can not climb walls. Some can do walls but fight with stairs.

Please don't purchase a pool cleaning bot unless you've read our reviews! You'll thank us later.


​​Dolphin Nautilus CC Plus on Amazon
Our Nautilus CC Plus Inspection


BUT - If your pool tends to collect a whole lot of debris (leaves, ​bugs, etc) along with the water, then we'd suggest going with a pressure side cleaner such as the Polaris 360.
The Polaris ​360 not only cleans the bottom of your swimming pool, but it also uses your yield water that is pools to make a vortex which essentially brings crap into the bag from your swimming pool.
As it uses your swimming pools flow pump unlike a lot of pressure side cleaners, a booster pump is NOT required to use it!

Visit our website today at https://bestpoolrobots.com/ to know more.

Leave a Reply

Your email address will not be published. Required fields are marked *